Single axis humidifier; It consists of four parts: uniform feeding, blade feeding, mixed impact humidification, vibration system, etc., and is equipped with electronic control and water supply system. The equipment is fixed on the base as a whole, and the cylinder is supported by four sets of elastic elements. Through the excitation device, vibration is applied to the cylinder, causing high-frequency vibration during the operation of the whole machine. The gap between the cylinder wall and the mixing shaft is always maintained, greatly reducing the resistance to the operation of the whole machine, eliminating the phenomenon of stagnation and stalling, reducing the downtime for cleaning, and improving work efficiency. The water supply is controlled by a valve group. To stabilize the water supply and clean water quality of this system, filters are installed in the pipeline, and the various parts of the humidifier are interlocked and controlled by the main control cabinet to achieve the goal of controlling the constant humidity operation of the water supply.

Characteristics of a single axis humidifier:

1. The shaft seal adopts a combination of multi slot labyrinth and packing for sealing, and the wear on the shaft is light.

2. High output (can mix and humidify 200t per hour), uniform humidification, and work.

3. The atomization nozzle and adjustable water supply system can evenly humidify materials.

4. The stirring rod is made of iron-based alloy or composite ceramic, with a long service life.

5. The inner lining of the shell is made of iron-based alloy to avoid material self flow caused by excessive clearance after wear.

6. This machine has flexible layout, with two forms of chain transmission and direct connection. The transmission mechanism adopts a cycloidal reducer.

7. By adding a vibration system, it overcomes the problem of wall adhesion caused by the handling of viscous dust, improves the adaptability of the humidifier, and expands its application range. And the shell and base are connected elastically, so that vibration has no effect on the whole machine.

Single axis humidifiers are mainly used for spraying, humidifying, stirring, and conveying powdered dry ash from various ash storage facilities to meet the requirements of environmental protection and external transportation. Widely used for humidification, mixing, and transportation of solid particulate materials in chemical, mining, power plants, steel mills, and other industries.

Main technical parameters of single axis dust humidifier:

DSZ-50 DSZ-60 DSZ-80 DSZ-100 DSZ-120

Production capacity (m3/h) 15 30 60 100 160

Humidification method: single axis mixer

Motor power (kw) 7.5 11 18.5 37 45

Average water addition rate (m3/h) 2.2-3.7 4.5-7.5 9-15 12-20 24-40

Average moisture content after humidification (%) 15-25

Water pressure range Mpa 0.2~0.6

Applicable temperature (℃) ≤ 300

Water pipe interface size Dg25 Dg32 Dg40 Dg40 Dg50

Vibration motor power (kw) 0.5 0.75 1.1 2.2 2.2